Product introduction
Introducing the Super Wear-Resistant Floor Sealing Hardener! This revolutionary product penetrates deeply into concrete surfaces (5mm - 8mm), interacting with free calcium and magnesium ions to create an incredibly dense crystalline structure. This groundbreaking reaction enhances the entire surface, transforming your concrete floor into a hard, durable, and visually appealing masterpiece.
Specially designed for emery floors, the lithium-based hardener elevates the durability and wear resistance of these robust surfaces (commonly referred to as wear-resistant floors).
Over time, emery floors can accumulate dust and dirt due to their inherent porosity as cement-based products. However, emery floors have unique structural compositions, pH levels, and trace element contents compared to other basic floors. Our emery floor hardener is meticulously formulated to address these specific characteristics, ensuring that all active components within the emery floor fully react, resulting in a uniformly treated and resilient surface.
Application scope
Our product is ideal for a wide range of applications, including: Industrial floors, Workshop floors, Supermarket floors, Concrete parking lots, Concrete highways, Airport runways, Concrete bridges, Concrete docks, Concrete walls, Sports centers, Any location with a concrete or cement mortar base, Reinforcement of new and old concrete bases, Reinforcement of new and old terrazzo bases, and Reinforcement of new and old hardened wear-resistant floors.
Technical parameters
Hardness: After treatment, the surface hardness of the ground is reached within 1-3 days, and the highest hardness is reached
within 90-120 days |
| Impact Strength: Increased by 13%, with a hardness of Mohs scale 6. |
| Gloss: Reaches a marble-like gloss under normal walking conditions after 90-180 days. |
| Oil Penetration: Penetration rate of 0.03cc per hour (no visible penetration or marks within 30 minutes when 1mm engine oil drop is applied on the test surface; oil stains can be cleaned within 8 hours). |
| Wear Resistance: Enhances more than 40% compared to ordinary concrete floors. |
| Dust Resistance: No dust generated under Mohs scale 6 testing. |
| Flexural Strength: 28d ≥ 8MPa,Compressive Strength: 28d ≥ 50MPa. |
Advantages of Concrete Sealing Hardener Floors
- High Strength: Once treated, the concrete surface achieves an impressive Mohs hardness of 8, effectively increasing its strength by approximately 200%.
- Wear Resistance: The integral components of the concrete solidify into a hard, dense mass, enhancing wear resistance by an astounding six times.
- Dust Prevention: The chemical interactions with silicates in the concrete form an impenetrable structure, effectively preventing dust accumulation on the surface.
- Compression Resistance: Treated concrete samples exhibit a 40% increase in compressive strength compared to untreated ones, with flexural strength more than doubling.
- Water Resistance: It penetrates the concrete effectively, sealing pores and significantly inhibiting the ingress of water, oil, and other contaminants.
- Aging Resistance: Provides robust protection against damage from chloride ions and UV exposure, ensuring the concrete remains unaffected by electromagnetic fields or mist.
- Corrosion Resistance: The enhanced formulation significantly boosts the corrosion resistance of the treated concrete surface.
- Bonding Strength: Increases bonding strength with epoxy resin by 21.9%, while maintaining strong adhesion with coatings.
- Glossiness: Transforms the treated concrete floor into a marble-like surface with a stunning sheen, which continues to improve with use over time.
){kind=link}