| Customization: | Available |
|---|---|
| Application: | Commercial Construction, Industrial Construction, Infrastructure Projects, Residential Construction |
| Color: | Gray |
|
Still deciding? Get samples of US$ 10/Bag
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The K50 self-leveling compound stands out with its superior strength, minimal shrinkage, and exceptional adhesion, forming a perfectly smooth and robust foundation for floor installations. It is masterfully suited for an array of solid substrates, such as concrete floors, cement mortar leveling layers, and stone tile surfaces.
1. Experience effortless ground leveling with its outstanding fluidity.
2. Enhance the foundation's density, hardness, and uniformity.
3. Minimize porosity while ensuring uniform absorption.
4. Benefit from a rapid drying and early setting formula, enabling the grinding and installation of decorative flooring materials in just 1-2 days.
5. Its low shrinkage feature ensures the prevention of cracks during ground treatment.
| Mixing ratio | 25kg: 6.5L~ 7L |
| Dry power density | about 1.3kg\L |
| Time before covering | about 24-48 hours |
| Consumption | 1.7kg\m2\mm |
| Compressive strength(mpa) | about 6Map after 1 day /about 23-25mpa after 28 days |
| Flexural strength(mpa) | about 2Map after 1 day /about 7Map after 28 days |
| Fire resistance rating | A1 |
Apply K50 seamlessly in thicknesses ranging from 2mm to 5mm in one go.
1. Meticulously clear the surface of oil stains, dust, loose debris, and any old coatings.
2. Smooth out uneven surfaces by grinding, removing loose concrete and debris, followed by a thorough vacuuming to eliminate dust and loose particles.
3. Ensure the base remains dry without any puddles.
4. For absorbent substrates, use the LG660 water-based absorbent interface treatment. For non-absorbent surfaces, the LG670 non-absorbent interface agent is recommended for optimal preparation.
Maintain a water-to-mortar ratio of 26% for optimal consistency.
1. Choose the right primer after thoroughly cleaning the base layer. Begin preparations for self-leveling once the primer is absorbed and somewhat dry, approximately 2-6 hours post-application.
2. Into a container, pour around 6 liters of clean water. Gradually mix in a 25-kilogram bag of self-leveling compound until it achieves a smooth, lump-free consistency. Spread the mixture evenly using a specialized notched trowel to control thickness. The freshly mixed material should be shielded from direct sunlight and strong winds. Ensure the mixing and application are finished within 10 minutes.
3. Use a defoaming roller on the surface before the self-leveling compound sets, to eliminate any entrapped air. Note: A pump with a delivery capacity of 20-40 liters per minute can be employed to transport the self-leveling slurry efficiently.
TRANSPORTATION
Store in a dry, ventilated, and cool environment, away from direct sunlight and moisture. When sealed, the product retains its quality for up to 6 months.
Ensure gentle handling during transport to avoid package damage from collisions or compression.
){kind=link}