Product introduction
Discover the exceptional capabilities of our Super Wear-resistant Floor Sealing Hardener. This advanced solution penetrates deep into concrete-ranging from 5mm to 8mm-where it reacts with free calcium and magnesium ions. The result is a dense crystalline structure that significantly enhances the hardness, durability, and aesthetic appeal of the entire concrete surface.
Our lithium-based hardener is expertly designed for emery floors, commonly referred to as wear-resistant floors, ensuring long-lasting resilience and performance.
Over time, emery floors can accumulate dust and dirt due to their natural porosity. Unlike standard cement products, emery floors possess unique structural, pH, and trace element characteristics. Our specialized hardener addresses these specific attributes, ensuring all active components in the emery floor engage in the reaction, delivering a uniformly enhanced surface.
Application scope
Ideal for a wide array of settings, including industrial floors, workshop floors, supermarket floors, concrete parking lots, highways, airport runways, bridges, docks, concrete walls, sports centers, concrete or cement mortar bases, and both new and old reinforced concrete and terrazzo bases, as well as hardened wear-resistant floors.
Technical Parameters
Hardness: After treatment, the surface hardness of the ground is reached within 1-3 days, and the highest hardness is reached
within 90-120 days |
| Impact Strength: Increased by 13%, with a hardness of Mohs scale 6. |
| Gloss: Reaches a marble-like gloss under normal walking conditions after 90-180 days. |
| Oil Penetration: Penetration rate of 0.03cc per hour (no visible penetration or marks within 30 minutes when 1mm engine oil drop is applied on the test surface; oil stains can be cleaned within 8 hours). |
| Wear Resistance: Enhances more than 40% compared to ordinary concrete floors. |
| Dust Resistance: No dust generated under Mohs scale 6 testing. |
| Flexural Strength: 28d ≥ 8MPa,Compressive Strength: 28d ≥ 50MPa. |
Advantages of Concrete Sealing Hardener Floors
- High StrengthThe treated concrete surface attains a Mohs hardness rating of 8, significantly boosting strength by approximately 200%.
- Wear ResistanceThe hardener solidifies various concrete components into a dense, hard mass, enhancing wear resistance up to six times.
- Dust PreventionChemical interactions with silicates in the concrete form a tightly packed structure, effectively preventing dust accumulation.
- Compression ResistanceTreated concrete samples show a 40% increase in compressive strength compared to untreated samples, with more than double the flexural strength.
- Water ResistanceThe hardener penetrates effectively, sealing pores and preventing the ingress of water, oil, and other contaminants.
- Aging ResistanceProvides robust protection against chloride ions and UV exposure, ensuring long-term integrity even in electromagnetic or misty environments.
- Corrosion ResistanceSignificantly enhances the corrosion resistance of the treated concrete surface.
- Bonding StrengthIncreases bonding strength with epoxy resin by 21.9%, while maintaining consistent bonding with other coatings.
- GlossinessThe treated concrete floor achieves a marble-like gloss, with a polished sheen that improves over time with use.
){kind=link}