Product introduction
Introducing our Super Wear-resistant Floor Sealing Hardener: a revolutionary solution designed to deeply penetrate concrete surfaces, achieving depths of 5mm to 8mm. This innovation triggers a fascinating chemical reaction with free calcium and magnesium ions within concrete, resulting in a compact and dense crystalline network. This metamorphic process strengthens the entire surface, rendering the concrete floor astoundingly hard, dazzlingly durable, and visually captivating.
Our Lithium-based Hardener for Emery Floors is a carefully crafted formula tailored to address the precise requirements of emery floors, popularly acknowledged as wear-resistant floors.
Emery floors, with their cementitious nature, may naturally gather dust and grime over time due to inherent porosity. The unique structural composition, pH balance, and trace elements of emery floors set them apart from conventional flooring materials. Our emery floor hardener is engineered to tackle these distinct characteristics, ensuring that every active component within the emery floor engages uniformly, culminating in a consistently hardened surface.
Application scope
Versatile and comprehensive, our product is ideal for a multitude of applications including: Industrial floors; Workshop floors; Supermarket floors; Expansive concrete parking lots; Concrete highways; Airport runways; Concrete bridges; Bustling concrete docks; Concrete walls; State-of-the-art sports centers; Any site possessing a concrete or cement mortar foundation; Reinforcement of both new and aged concrete bases; Enhancement of both fresh and seasoned terrazzo bases; and fortification of both new and time-worn hardened wear-resistant floors.
Technical Parameters
Hardness: After treatment, the surface hardness of the ground is reached within 1-3 days, and the highest hardness is reached
within 90-120 days |
| Impact Strength: Increased by 13%, with a hardness of Mohs scale 6. |
| Gloss: Reaches a marble-like gloss under normal walking conditions after 90-180 days. |
| Oil Penetration: Penetration rate of 0.03cc per hour (no visible penetration or marks within 30 minutes when 1mm engine oil drop is applied on the test surface; oil stains can be cleaned within 8 hours). |
| Wear Resistance: Enhances more than 40% compared to ordinary concrete floors. |
| Dust Resistance: No dust generated under Mohs scale 6 testing. |
| Flexural Strength: 28d ≥ 8MPa,Compressive Strength: 28d ≥ 50MPa. |
Advantages of Concrete Sealing Hardener Floors
- High Strength: With treatment, the concrete surface not only achieves an extraordinary Mohs hardness of 8 but also experiences an approximately 200% increase in its overall strength.
- Wear Resistance: The advanced components of the concrete undergo solidification into a hard, dense structure, consequently enhancing wear resistance by an impressive factor of six.
- Dust Prevention: By engaging in chemical reactions with silicates, a dense formation is established, effectively thwarting dust accumulation on the concrete surface.
- Compression Resistance: Post-treatment samples demonstrate a notable 40% elevation in compressive strength, alongside an over twofold increase in flexural strength, compared to untreated specimens.
- Water Resistance: Expertly penetrates the concrete matrix, sealing pores to deter the infiltration of water, oil, and diverse contaminants.
- Aging Resistance: Robustly protects against harm from chloride ions and UV radiation; the concrete remains resilient against electromagnetic interference or environmental mist.
- Corrosion Resistance: The corrosion resistance of the treated concrete surface witnesses significant enhancement.
- Bonding Strength: Bonding strength with epoxy resin is amplified by a striking 21.9%, while the bonding strength with surface coatings stays largely consistent.
- Glossiness: Transformed to exhibit a marble-like brilliance, the treated concrete floor's glossiness only improves with extended use.
){kind=link}