Product introduction
This Super Wear-resistant Floor Sealing Hardener boasts an impressive ability to deeply penetrate concrete surfaces, reaching depths of 5mm to 8mm. Through a chemical reaction with free calcium and magnesium ions in the concrete, it forms a dense crystalline structure. This transformative process fortifies the entire surface, making the concrete floor remarkably hard, exceptionally durable, and visually stunning.
The Lithium-based Hardener for Emery Floors is meticulously formulated to meet the specific needs of emery floors, which are often referred to as wear-resistant floors.
Emery floors, over time, may accumulate dust and dirt due to their inherent porosity as cementitious products. The structural composition, pH level, and trace element content of emery floors differ from other basic floors. The emery floor hardener is specially designed to address these unique characteristics, ensuring that all active components within the emery floor react uniformly, resulting in a consistently hardened surface.
Application scope
Industrial floors; Workshop floors; Supermarket floors; Concrete parking lots; Concrete highways; Airport runways; Concrete bridges; Concrete docks; Concrete walls; Sports centers; Any location with a concrete or cement mortar base; Reinforcement of new and old concrete bases; Reinforcement of new and old terrazzo bases; Reinforcement of new and old hardened wear-resistant floors.
Technical Parameters
Hardness: After treatment, the surface hardness of the ground is reached within 1-3 days, and the highest hardness is reached
within 90-120 days |
| Impact Strength: Increased by 13%, with a hardness of Mohs scale 6. |
| Gloss: Reaches a marble-like gloss under normal walking conditions after 90-180 days. |
| Oil Penetration: Penetration rate of 0.03cc per hour (no visible penetration or marks within 30 minutes when 1mm engine oil drop is applied on the test surface; oil stains can be cleaned within 8 hours). |
| Wear Resistance: Enhances more than 40% compared to ordinary concrete floors. |
| Dust Resistance: No dust generated under Mohs scale 6 testing. |
| Flexural Strength: 28d ≥ 8MPa,Compressive Strength: 28d ≥ 50MPa. |
Advantages of Concrete Sealing Hardener Floors
- High Strength: The treated concrete surface achieves an impressive Mohs hardness of 8, boosting its strength by approximately 200%.
- Wear Resistance: The various components within the concrete solidify into a hard, dense mass, enhancing wear resistance by approximately six times.
- Dust Prevention: Through chemical reactions with the silicates in the concrete, a dense structure is formed, preventing dust accumulation on the surface.
- Compression Resistance: Treated samples show a remarkable 40% increase in compressive strength compared to untreated samples, with flexural strength more than doubling.
- Water Resistance: Effectively penetrates the concrete, sealing the pores and preventing the ingress of water, oil, and other contaminants.
- Aging Resistance: Effectively guards against damage from chloride ions and UV exposure; the concrete remains unaffected by electromagnetic fields or mist.
- Corrosion Resistance: The corrosion resistance of the treated concrete surface is significantly enhanced.
- Bonding Strength: Bonding strength with epoxy resin increases by an impressive 21.9%, while bonding strength with coatings remains largely unchanged.
- Glossiness: The treated concrete floor exhibits a marble-like sheen, with gloss improving over prolonged use.
){kind=link}