Product introduction
Discover the perfect solution for reinforcing cement mortar wall surfaces. Ideal for ensuring minimal sand shedding, our product is perfectly suited for aerated concrete block surfaces. Compatible with putty powder, paint, and cement mortar surfaces, or absorbent substrates such as concrete. Our product excels at sealing capillary pores and cracks in substrates, dramatically lowering the absorption rate of porous materials.
This cutting-edge innovation effectively prevents moisture from being absorbed by the substrate in the leveling layer, significantly enhancing the bonding strength of the leveling layer. Experience superior adhesion between the leveling layer and the foundation, effectively resolving common issues such as peeling, flaking, cracking, and bubbling.
Performance characteristics
>> This water-based emulsion is both environmentally friendly and safe for application
>> Offers outstanding penetration capabilities, ensuring ease of application
>> A comprehensive formulation that combines sealing, penetrating, and hardening properties
>> Ideal for direct interface treatment, enhancing substrate strength, improving sealing, and reducing absorption
>> Dramatically enhances the bonding strength of the leveling layer, ensuring firm and lasting adhesion between the leveling layer and the substrate, effectively preventing any peeling, flaking, cracking, or bubbling
>> Suitable for both wall and floor substrates, providing versatile application options
Substrate Treatment
Ensure the substrate surface is smooth & dry, devoid of cracks, oil stains & chemical additives like release agents. If the substrate is loose or shows heavy sand shedding, reinforcement with this product is not recommended, and shot blasting is advised. Sand the substrate thoroughly and vacuum before application.
>> Clear away any unstable loose materials and oil stains from the floor surface.
>> Dilute the hardener with water in a ratio of 1:1 to 1:2, adjusting for the substrate's absorption rate. Apply a single coat with a roller brush, ensuring full penetration.
>> For enhanced reinforcement, apply multiple coats as necessary.
>> Once fully cured, the substrate is ready to be coated with putty powder, anti-crack mortar, plastering, surface mortar, or self-levelingcement.
| TechnicalData |
| Appearance |
White Emulsion with blue light |
| (25ºC)PH |
7±] |
| Solid Content |
17±2 |
| Minimum film forming temperature |
5ºC |
| Package |
5kg-10kg-20kg |
){kind=link}