Product introduction
This Super Wear-resistant Floor Sealing Hardener is a marvel of engineering, equipped with the incredible capability to deeply penetrate concrete surfaces, achieving depths from 5mm to 8mm. Through a sophisticated chemical reaction with free calcium and magnesium ions present in the concrete, it establishes a dense crystalline structure. This transformative process not only enhances the entire surface but also results in a concrete floor that is remarkably hard, exceptionally enduring, and visually captivating.
The Lithium-based Hardener for Emery Floors is expertly formulated to cater to the distinct requirements of emery floors, commonly known as wear-resistant floors.
Over time, emery floors are prone to accumulating dust and dirt due to their inherent porosity as cementitious products. The structural composition, pH level, and trace element content of emery floors vary significantly from other basic floors. This specially designed emery floor hardener precisely addresses these unique characteristics, ensuring that all active components within the emery floor uniformly react, culminating in a consistently hardened surface.
Application scope
Industrial floors; Workshop floors; Supermarket floors; Concrete parking lots; Concrete highways; Airport runways; Concrete bridges; Concrete docks; Concrete walls; Sports centers; Any location with a concrete or cement mortar base; Reinforcement of new and old concrete bases; Reinforcement of new and old terrazzo bases; Reinforcement of new and old hardened wear-resistant floors.
Comprehensive Technical Parameters
Hardness: After treatment, the surface hardness of the ground is reached within 1-3 days, and the highest hardness is reached
within 90-120 days |
| Impact Strength: Increased by 13%, with a hardness of Mohs scale 6. |
| Gloss: Reaches a marble-like gloss under normal walking conditions after 90-180 days. |
| Oil Penetration: Penetration rate of 0.03cc per hour (no visible penetration or marks within 30 minutes when 1mm engine oil drop is applied on the test surface; oil stains can be cleaned within 8 hours). |
| Wear Resistance: Enhances more than 40% compared to ordinary concrete floors. |
| Dust Resistance: No dust generated under Mohs scale 6 testing. |
| Flexural Strength: 28d ≥ 8MPa,Compressive Strength: 28d ≥ 50MPa. |
Unmatched Advantages of Concrete Sealing Hardener Floors
- Exceptionally High Strength: The treated concrete surface attains an impressive Mohs hardness of 8, magnifying its strength by approximately 200%.
- Superior Wear Resistance: The diverse components within the concrete coalesce into a hard, dense mass, amplifying wear resistance by approximately six times.
- Effective Dust Prevention: Through intricate chemical reactions with the silicates in the concrete, a dense structure is formed, effectively preventing dust buildup on the surface.
- Robust Compression Resistance: Treated samples display a remarkable 40% surge in compressive strength compared to untreated samples, with flexural strength more than doubling.
- Enhanced Water Resistance: Efficiently penetrates the concrete, sealing the pores and obstructing the ingress of water, oil, and various contaminants.
- Remarkable Aging Resistance: Offers robust protection against damage from chloride ions and UV exposure; the concrete remains impervious to electromagnetic fields or mist.
- Elevated Corrosion Resistance: The corrosion resistance of the treated concrete surface is significantly fortified.
- Improved Bonding Strength: Bonding strength with epoxy resin increases by a noteworthy 21.9%, while bonding strength with coatings remains substantially consistent.
- Dazzling Glossiness: The treated concrete floor showcases a stunning marble-like sheen, with gloss improvement observed over extended use.
){kind=link}