Product introduction
Our Eco-Friendly Sheet Vinyl Install Glue is designed to fortify cement mortar wall surfaces with slight sand shedding and aerated concrete block surfaces. Ideal for use on putty powder, paint, cement mortar surfaces, or absorbent substrates such as concrete. This innovative product seals capillary pores and cracks in substrates, significantly reducing the absorption of porous materials.
By preventing the moisture in the leveling layer from being absorbed by the substrate, it greatly enhances the bonding strength of the leveling layer. This ensures firm adhesion between the leveling layer and the foundation, effectively eliminating issues such as peeling, flaking, cracking, and bubbling.
Performance characteristics
>> Water-based emulsion, environmentally friendly, and sustainable
>> Super strong penetration, easy and convenient to apply
>> Offers a unique sealing, penetrating, and hardening three-in-one solution
>> Can be directly used for interface treatment, significantly enhancing substrate strength, sealing the substrate, and reducing substrate absorption
>> Enhances the bonding strength of the leveling layer, ensuring firm and lasting adhesion between the leveling layer and the substrate, preventing common issues such as peeling, flaking, cracking, and bubbling.>> Suitable for both wall and floor substrates, making it versatile and adaptable
>> Suitable for both wall and floor substrates
Substrate Treatment
Ensure the substrate surface is smooth & dry, free of cracks, oil stains, and chemical additives such as release agents. If the substrate surface is loose or exhibits large areas of sand shedding, this product is not suitable for reinforcement; shot blasting is required. Sand the substrate and thoroughly vacuum before application.
>> Remove any unstable loose materials and oil stains from the floor surface thoroughly.
>> Dilute the hardener with water at a ratio of 1:1 to 1:2 depending on substrate absorption, and apply one coat with a roller brush, ensuring complete penetration.
>> For optimal reinforcement effect, multiple coats can be applied as needed.
>> After curing, the substrate can be directly applied with putty powder, anti-crack mortar, plastering, surface mortar, or self-leveling cement.
| TechnicalData |
| Appearance |
White Emulsion with blue light |
| (25ºC)PH |
7±] |
| Solid Content |
17±2 |
| Minimum film forming temperature |
5ºC |
| Package |
5kg-10kg-20kg |
){kind=link}