Performance characteristics
Discover the versatility and superior performance of LG9000, our premium water-based adhesive expertly crafted for floor decoration materials demanding both high elasticity and robust curing properties, such as wood flooring, SPC, WPC, and LVT. Perfectly suited for wet-bond and pressure-sensitive applications on pre-treated absorbent substrates, this adhesive also demonstrates impressive capability as a gap-filling and pressure-sensitive option on non-absorbent substrates or existing flooring within reasonable limits.
Maximize installation efficiency with LG9000 when used on non-absorbent substrates, allowing flooring to be installed a swift 20-50 minutes post-application. Revel in its enduring adhesion, formidable peel and shear strength, rapid curing, and exceptional curing strength. It's imperative for the substrate to be solid, smooth, dry, crack-free, and dust-free. For challenging conditions such as uneven, rough, or dusty surfaces, or non-absorbent substrates, pre-treatment with LG180 Substrate Hardener or LG670 Non-Absorbent Interface Agent is advised to ensure optimal bonding and prevent substrate debonding.
Installation Instructions
For an impeccable wood flooring installation, the use of a B11 notched trowel, specifically designed for wood flooring adhesive, is paramount. Ensure to replace the notched bar every 100 square meters to maintain performance. The open time should be carefully calculated considering the amount of adhesive applied, prevailing climate conditions, and the substrate's absorption rate. The adhesive is optimally ready when it begins to form strings, indicating perfect timing for application.
Extend the uses of LG9000 to wet bonding for SPC, WPC, and LVT flooring by utilizing a B1 notched trowel, with the notched bar refreshed every 100 square meters. Initiate flooring installation when the adhesive starts stringing, ensuring it firmly adheres and transfers to the flooring's back. For optimal results, roll the entire installed surface with precision, employing a cork board to press edges and corners. Guarantee a flawlessly pressed, dead-spot-free surface for complete adhesive bonding. Repeat the rolling process after 20 minutes for added bonding assurance. Strict adherence to the technical instructions provided by Lan Guan will enhance the quality of the installation.












