Product introduction
Discover the ultimate solution for reinforcing cement mortar wall surfaces with minimal sand shedding. Perfect for aerated concrete block surfaces, putty powder, paint, cement mortar surfaces, or absorbent substrates such as concrete. Expertly seals capillary pores and cracks within the substrate, dramatically reducing the absorption rate of porous materials.
This groundbreaking product prevents moisture within the leveling layer from being absorbed by the substrate, thus enhancing the bonding strength of the leveling layer. This guarantees a robust adhesion between the leveling layer and the foundation, eliminating common issues like peeling, flaking, cracking, and bubbling.
Performance characteristics
>> A water-based emulsion that's environmentally friendly and safe for use
>> Offers exceptional penetration for easy and efficient application
>> A powerful formulation that combines sealing, penetrating, and hardening capabilities
>> Ideal for direct interface treatment, enhancing substrate strength, providing sealing, and reducing substrate absorption
>> Enhances the bonding strength of the leveling layer, ensuring a solid adhesion between the leveling layer and the substrate, effectively preventing issues such as peeling, flaking, cracking, and bubbling
>> Suitable for both wall and floor substrates, offering versatile application solutions
Substrate Treatment
Ensure the substrate surface is smooth & dry, devoid of cracks, oil stains & chemical additives like release agents. If the substrate surface is loose or shows excessive sand shedding, this product is not recommended for reinforcement, and shot blasting is required. Sand the substrate and thoroughly vacuum before application.
>> Remove any unstable loose materials and oil stains from the floor surface.
>> Dilute the hardener with water at a ratio of 1:1 to 1:2, based on the substrate's absorption rate. Apply one coat with a roller brush to ensure full penetration.
>> For enhanced reinforcement, multiple coats can be applied as necessary.
>> Once fully cured, the substrate is ready to be directly coated with putty powder, anti-crack mortar, plastering, surface mortar, or self-levelingcement.
| TechnicalData |
| Appearance |
White Emulsion with blue light |
| (25ºC)PH |
7±] |
| Solid Content |
17±2 |
| Minimum film forming temperature |
5ºC |
| Package |
5kg-10kg-20kg |
Audited Supplier 
){kind=link}