Product introduction
Discover the ultimate solution for fortifying cement mortar wall surfaces without the hassle of sand shedding. Perfect for aerated concrete blocks, putty powder, paint, cement mortar surfaces, or absorbent substrates like concrete, our product offers unmatched performance. Harness the power of our innovative technology to effectively seal capillary pores and cracks in the substrate, resulting in a dramatic reduction of absorption rates in porous materials.
This cutting-edge product acts as a barrier, preventing unwanted moisture from infiltrating the leveling layer. This enhancement substantially boosts the bonding strength of the leveling layer, ensuring a resilient adhesion between the leveling layer and the foundation. Say goodbye to common issues such as peeling, flaking, cracking, and bubbling.
Performance characteristics
>> Experience the benefits of a water-based emulsion that is both environmentally friendly and safe for use
>> With exceptional penetration capabilities, applications are simplified and more efficient
>> Our product's formulation uniquely combines sealing, penetrating, and hardening properties for powerful performance
>> Optimize direct interface treatment with enhanced substrate strength, effective sealing, and reduced substrate absorption
>> Strengthens the bonding strength of the leveling layer, guaranteeing steadfast adhesion between the leveling layer and the substrate, effectively preventing issues like peeling, flaking, cracking, and bubbling.
>> Versatile application suitable for both wall and floor substrates
Substrate Treatment
Ensure the substrate surface is impeccably smooth & dry, free from cracks, oil stains, & unwanted chemical additives like release agents. For surfaces that are loose or exhibit extensive sand shedding, this product is not recommended for reinforcement. Opt for shot blasting, followed by thorough sanding and vacuuming before application.
>> Begin by eliminating unstable loose materials and oil stains from the floor surface.
>> Dilute the hardener with water at a ratio of 1:1 to 1:2, adjusted to the substrate's absorption rate. Apply a single coat with a roller brush, ensuring thorough penetration.
>> For enhanced reinforcement, additional coats can be applied as needed.
>> Upon full curing, the substrate becomes ready for direct application of putty powder, anti-crack mortar, plastering, surface mortar, or self-leveling cement..
| TechnicalData |
| Appearance |
White Emulsion with blue light |
| (25ºC)PH |
7±] |
| Solid Content |
17±2 |
| Minimum film forming temperature |
5ºC |
| Package |
5kg-10kg-20kg |
){kind=link}