Product introduction
Discover the power of our revolutionary adhesive, meticulously engineered to strengthen cement mortar wall surfaces with minimal sand shedding and fortify aerated concrete block surfaces for impeccable stability. Perfectly suited for application on putty powder, paint, cement mortar surfaces, or absorbent substrates such as concrete, this adhesive is your go-to solution. Our adhesive masterfully seals capillary pores and cracks within the substrate, significantly diminishing the absorption capacity of porous materials.
By expertly preventing moisture in the leveling layer from being drawn into the substrate, it significantly enhances the bonding strength, guaranteeing robust adhesion between the leveling layer and the foundation. This effectively eradicates issues such as peeling, flaking, cracking, and bubbling, ensuring a flawless finish.
Performance characteristics
>> As a water-based emulsion, this adhesive is both environmentally friendly and safe, ideal for eco-conscious sites.
>> Exceptional penetration capabilities ensure effortless and smooth application.
>> A multifunctional marvel: sealing, penetrating, and hardening all combined into one innovative product.
>> Directly applicable for interface treatment, it enhances substrate strength, seals the substrate, and significantly reduces substrate absorption.
>> Amplifies the bonding strength of the leveling layer, ensuring steadfast adhesion between the leveling layer and the substrate. This effectively prevents peeling, flaking, cracking, and bubbling, providing a seamless finish.
>> Adaptable for both wall and floor substrates, making it a versatile choice for a wide range of applications.
Substrate Treatment
Ensure the substrate surface is smooth & dry, devoid of cracks, oil stains & chemical additives such as release agents. If the surface exhibits looseness or extensive sand shedding, reinforcement with this product is unsuitable. Under such conditions, shot blasting is required. Always sand and thoroughly vacuum the substrate prior to application.
>> Eliminate any unstable loose materials and oil stains from the floor surface to prepare for application.
>> Dilute the hardener with water at a ratio of 1:1 to 1:2, or adjust according to the substrate's absorption rate. Apply one coat with a roller brush to ensure comprehensive penetration.
>> For enhanced reinforcement, apply multiple coats as needed.
>> Post curing, the substrate can be directly coated with putty powder, anti-crack mortar, plastering, surface mortar, or self-levelingcement, offering a plethora of finishing options.
TechnicalData |
Appearance |
White Emulsion with blue light |
(25ºC)PH |
7±] |
Solid Content |
17±2 |
Minimum film forming temperature |
5ºC |
Package |
5kg-10kg-20kg |













