K80 Ultra-High Strength Self-Leveling Cement is a high-performance water-setting inorganic composite material. It is made from special cement, fine aggregates, polymer spray-dried powder resin from foreign brands, and other cement additives, carefully formulated to provide a smooth indoor floor leveling before various types of floor construction.
APPLICATION SCOPE
K80, with its high strength, wear resistance, pressure resistance, oil corrosion resistance, and excellent resistance to strong alkaline substances, provides an ideal solution for floor surface treatment in heavy commercial, industrial areas, and light industrial assembly processing locations.
PRODUCT ADVANTAGES
1. Outstanding wear resistance and durability
2. improving the density, hardness, and homogeneity of the foundation
3. High compressive strength to withstand heavy pressure
4. Resistant to chemical corrosion, similar to concrete
5. Ultra-low shrinkage rate, preventing the occurrence of cracks
TECHNICAL DATA
| Mixing ratio |
25kg: 6.3L~ 7L |
| Dry power density |
about 1.3kg\L |
| Working time |
About 30 minutes at 20°C |
| Consumption |
21.7kg\m \mm |
| Wear resistance |
BS8204AR1 |
| Compressive strength(mpa) |
about 6Map after 1 day /about 18-20mpa after 28 days |
| Flexural strength(mpa) |
about 2Map after 1 day /about 5Map after 28 days |
| Fire resistance rating |
A1 |
THICKNESS
k80 can be applied from 3mm to 8mm thickness in one application.
SUBFLOOR PREPARATION
1. Remove oil stains, dust, loose debris, and old coatings from the surface.
2. Sand the uneven ground to remove loose concrete and impurities.
3. Keep the base dry and free of puddles.
4. For absorbent substrates, it is recommended to use LG660 water-based absorbent interface treatment agent; for non-absorbent surface substrates, it is recommended to use LG670 non-absorbent interface agent for treatment.
water-to-ingredient ratio
Water to mortar ratio: 1:5
APPLICATION
IMPORTANT NOTES
1. The construction environment temperature should be controlled between 5°C and 30°C, and the relative humidity should not be too high.
2.Add water strictly according to the ratio specified in the product manual to avoid affecting the performance of the self-leveling material by adding too much or too little water.
3. The mixed self-leveling material should be applied within 20 minutes to prevent the material from solidifying and becoming unusable.
4. Pay attention to safety during construction to avoid splashing the material into the eyes or onto the skin.
5. During the curing period, avoid the ground being hit by heavy objects or soaked in water.
TRANSPORTATION
Should be stored in a dry, ventilated, and cool place, away from direct sunlight and moisture.During transportation, avoid collisions and compression to prevent damage to the packaging.
){kind=link}