| Customization: | Available |
|---|---|
| Application: | Commercial Construction, Industrial Construction, Infrastructure Projects, Residential Construction |
| Color: | Gray |
|
Still deciding? Get samples of US$ 10/Bag
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The K50 self-leveling compound stands out for its remarkable strength, minimal shrinkage, and superb adhesion, creating a flawlessly smooth and robust base for floor installations. It is designed to be compatible with a wide array of solid substrates such as concrete floors, cement mortar leveling layers, and stone tile surfaces.
1. Possessing superb fluidity, it effortlessly levels the ground
2. Enhances the density, hardness, and uniformity of the foundation
3. Minimizes porosity and optimizes uniform absorption
4. Boasts quick drying and early setting, facilitating grinding and decorative floor installation just 1-2 days post-application
5. Low shrinkage characteristic minimizes the risk of ground cracking
| Mixing ratio | 25kg: 6.5L~ 7L |
| Dry power density | about 1.3kg\L |
| Time before covering | about 24-48 hours |
| Consumption | 1.7kg\m2\mm |
| Compressive strength(mpa) | about 6Map after 1 day /about 23-25mpa after 28 days |
| Flexural strength(mpa) | about 2Map after 1 day /about 7Map after 28 days |
| Fire resistance rating | A1 |
The K50 compound can be applied in a single layer ranging from 2mm to 5mm thickness.
1. Thoroughly eliminate oil stains, dust, loose debris, and any residual coatings from the surface.
2. Grind any uneven surfaces to remove loose concrete and debris, then vacuum to clean up any remaining dust and materials.
3. Ensure the base is kept dry and free from puddles.
4. For absorbent substrates, use the recommended LG660 water-based absorbent interface treatment agent. For non-absorbent surfaces, employ the LG670 non-absorbent interface agent for optimal results.
Maintain a water to mortar ratio of 26% for ideal consistency.
1. After meticulously cleaning the base layer, choose the appropriate primer. Commence self-leveling pre-work once the primer is absorbed and drying (approximately 2-6 hours post-application).
2. Begin by pouring about 6 liters of clean water into a mixing container. Gradually add a 25-kilogram bag of self-leveling compound, blending with a mixer until smooth and lump-free. Pour and spread the mixture evenly, using a specialized notched trowel to control thickness. Shield the fresh mixture from direct sunlight and strong winds; complete mixing and application within 10 minutes.
3. Use a defoaming roller on the surface before the compound sets to remove any entrapped air. Note: A pump with a delivery capacity of 20-40 liters per minute is ideal for transporting the self-leveling slurry.
TRANSPORTATION
Store in a dry, airy, and cool environment, shielded from direct sunlight and moisture. When sealed, it maintains a shelf life of 6 months.
During transit, handle with care to avoid collisions and compression, ensuring the integrity of the packaging.
){kind=link}