| Customization: | Available |
|---|---|
| Application: | Commercial Construction, Decorative Concrete, Industrial Construction, Residential Construction |
| Color: | Gray |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introducing the K50 Commercial Self-Leveling Compound, a pinnacle of high-performance technology in water-hardening inorganic composites. This marvel of engineering, crafted from premium raw materials and expertly formulated, showcases extraordinary fluidity to achieve flawless leveling of indoor floors with unmatched precision. Perfect for pre-leveling before the installation of diverse floor coverings such as plastic flooring, sheet materials, tiles, and wooden floors, this versatile compound is your ultimate flooring solution.
Renowned for its exceptional strength, minimal shrinkage, and superior adhesion, the K50 Self-Leveling Compound establishes a seamless, robust foundation that is ideal for floor installation. It's perfectly engineered for compatibility with a wide array of solid substrates, including concrete floors, cement mortar leveling layers, and stone tile surfaces, ensuring an enduring and flawless finish.
1. Delivers outstanding fluidity, effortlessly smoothing and leveling the ground with precision.
2. Dramatically enhances the density, hardness, and uniformity of the foundational layer.
3. Efficiently reduces porosity while encouraging consistent absorption across the surface.
4. Features rapid drying and swift initial setting, allowing the installation of decorative flooring materials within a brief 1-2 days.
5. Exhibits low shrinkage properties, effectively preventing cracking during the ground preparation phase.
| Mixing ratio | 25kg: 6.5L~ 7L |
| Dry power density | about 1.3kg\L |
| Time before covering | about 24-48 hours |
| Consumption | 1.7kg\m2\mm |
| Compressive strength(mpa) | about 6Map after 1 day /about 23-25mpa after 28 days |
| Flexural strength(mpa) | about 2Map after 1 day /about 7Map after 28 days |
| Fire resistance rating | A1 |
The K50 can be seamlessly applied at a variable thickness ranging from 2mm to 5mm in a single pass, ensuring ease of application and versatility.
1. Rigorously remove oil stains, dust, loose debris, and any old coatings from the surface to ensure optimal results.
2. Level uneven surfaces by grinding away loose concrete and debris, followed by vacuuming to remove residual materials and dust.
3. Keep the base dry, ensuring the absence of puddles for a perfect application.
4. For absorbent substrates, use the LG660 water-based absorbent interface treatment agent; for non-absorbent substrates, apply the LG670 non-absorbent interface agent for superior treatment and preparation.
Maintain a precise water to mortar ratio of 26% to achieve optimal performance and results.
1. After thoroughly cleaning the base layer, select the appropriate primer. Once the primer is absorbed and begins to dry (typically 2-6 hours after application), proceed with self-leveling preparations.
2. Add approximately 6 liters of clean water into a container, gradually incorporate a 25-kilogram bag of self-leveling compound, and mix thoroughly with a mixer until smooth and lump-free. Evenly distribute the mixed material using a specialized notched trowel to manage thickness. Shield the freshly mixed material from direct sunlight and strong winds, completing the mixing and application within 10 minutes for optimal results.
3. Before the self-leveling compound sets, use a defoaming roller to eradicate any trapped air bubbles. Note: Utilizing a pump with a delivery capacity of 20-40 liters per minute can greatly enhance the efficiency of transporting the self-leveling slurry.
TRANSPORTATION
Store in a cool, dry, and ventilated environment, away from direct sunlight and moisture. Sealed, the product upholds a reliable 6-month shelf life.
During transit, ensure to avoid collisions and pressure to protect the integrity of the packaging and prevent any potential damage.
){kind=link}