Product introduction
Behold the Super Wear-resistant Floor Sealing Hardener - a groundbreaking innovation that penetrates concrete surfaces to remarkable depths of 5mm to 8mm. This state-of-the-art formulation interacts with free calcium and magnesium ions within the concrete, forging a robust crystalline architecture that enhances and strengthens the entire surface. The culmination is a concrete floor that achieves unparalleled hardness, extraordinary durability, and an aesthetic allure that captivates.
Our lithium-based hardener is meticulously engineered for emery floors, often known as wear-resistant floors, delivering outstanding performance and unmatched durability.
Emery floors, over time, may encounter dust and dirt challenges due to their inherently porous nature as cement-based products. The unique structural composition, pH balance, and trace elements within emery floors distinguish them from other flooring types. Our expertly formulated emery floor hardener precisely addresses these specific characteristics, ensuring that each active component within the emery floor engages in the reaction. This leads to a consistently hardened and uniformly reacted surface.
Application scope
Perfectly suited for: Industrial floors; Workshop floors; Supermarket floors; Concrete parking lots; Expansive concrete highways; Airport runways; Sturdy concrete bridges; Robust concrete docks; Concrete walls; Vibrant sports centers; Any area with concrete or cement mortar bases; Reinforcement and enhancement for both new and aged concrete bases; Reinforcement for new and mature terrazzo bases; Fortification of new and existing hardened wear-resistant floors.
Technical Parameters
Hardness: After treatment, the surface hardness of the ground is reached within 1-3 days, and the highest hardness is reached
within 90-120 days |
| Impact Strength: Increased by 13%, with a hardness of Mohs scale 6. |
| Gloss: Reaches a marble-like gloss under normal walking conditions after 90-180 days. |
| Oil Penetration: Penetration rate of 0.03cc per hour (no visible penetration or marks within 30 minutes when 1mm engine oil drop is applied on the test surface; oil stains can be cleaned within 8 hours). |
| Wear Resistance: Enhances more than 40% compared to ordinary concrete floors. |
| Dust Resistance: No dust generated under Mohs scale 6 testing. |
| Flexural Strength: 28d ≥ 8MPa,Compressive Strength: 28d ≥ 50MPa. |
Advantages of Concrete Sealing Hardener Floors
- High Strength: The fortified concrete surface reaches an astonishing Mohs hardness of 8, amplifying its strength by an impressive 200%.
- Wear Resistance: The hardener solidifies various components within the concrete into a compact mass, achieving wear resistance that improves by approximately sixfold.
- Dust Prevention: Through chemical reactions with the silicates found in concrete, a dense structural barrier forms, effectively thwarting dust accumulation on the surface.
- Compression Resistance: The treated concrete demonstrates a 40% increase in compressive strength compared to untreated surfaces, with flexural strength more than doubling.
- Water Resistance: This hardener penetrates deeply, sealing pores and effectively preventing water, oil, and contaminant infiltration.
- Aging Resistance: It adeptly safeguards against damage from chloride ions and UV exposure, ensuring concrete remains unaltered by electromagnetic fields or mist.
- Corrosion Resistance: The treated concrete surface demonstrates vastly improved resistance to corrosion.
- Bonding Strength: Bonding strength with epoxy resin is enhanced by 21.9%, while the bonding strength with coatings largely remains unchanged.
- Glossiness: The treated concrete floor exhibits a stunning marble-like shine, with glossiness that naturally improves through time and use.
){kind=link}