Performance characteristics
The LG9000 water-based adhesive is your ultimate answer for all floor decoration materials that demand exceptional elasticity and superior curing properties, such as wood flooring, SPC, WPC, and LVT. It shines in its versatility, excelling as a wet-bond or pressure-sensitive adhesive on pre-treated absorbent substrates. Moreover, its remarkable adaptability allows it to work as a gap-filling and pressure-sensitive adhesive on non-absorbent substrates or existing flooring, albeit to a limited extent.
Enjoy the freedom of time with our adhesive's application on non-absorbent substrates, where flooring can be flawlessly installed between 20 to 50 minutes post-application. Revel in its enduring adhesion, outstanding peel and shear strength, rapid curing process, and robust curing strength. Ensure your substrate is built with a foundation that is solid, smooth, dry, and free from cracks and dust. For substrates that are uneven, rough, dusty, or non-absorbent, it's imperative to pre-treat the surface with LG180 Substrate Hardener or LG670 Non-Absorbent Interface Agent. This crucial step guarantees the prevention of substrate debonding, ensuring durability and longevity.
Installation Instructions
For a seamless wood flooring installation, the recommended tool of choice is a B11 notched trowel, specifically crafted for wood flooring adhesive. To maintain peak performance, replace the notched bar every 100 square meters. The 'open time'-the critical window for application-should be carefully determined based on the adhesive amount used, prevailing climate conditions, and the substrate's absorption rate. The adhesive reaches readiness when it begins to form strings, signaling the perfect moment to proceed with installation.
When it comes to the wet bonding of SPC, WPC, and LVT flooring, a B1 notched trowel is highly recommended. For optimal results, replace the notched bar every 100 square meters. Begin installing the flooring once the adhesive starts stringing, ensuring it adheres firmly and transfers smoothly to the back of the flooring. During installation, meticulously roll the entire installed surface with a roller, using a cork board to press along the edges and corners. This meticulous process ensures a flat, uniform bond without any gaps, allowing the flooring to meld perfectly with the adhesive. A repeat rolling after 20 minutes is essential. For further guidance, please adhere to the technical instructions provided by Lan Guan, which detail the nuanced steps for successful application.
){kind=link}