Performance characteristics
The LG9000 water-based adhesive is expertly crafted for those who demand nothing but the best for their floor decoration endeavors. This adhesive is your go-to solution for materials requiring exceptional elasticity and robust curing properties, such as wood flooring, SPC, WPC, and LVT. Versatile in application, it excels as a wet-bond and pressure-sensitive adhesive on pre-treated absorbent substrates. Moreover, it performs admirably as a gap-filling, pressure-sensitive adhesive on non-absorbent substrates or existing flooring, albeit within a limited scope.
For applications on non-absorbent substrates, efficiency is key-flooring can be expertly installed just 20-50 minutes post-adhesive application. Experience unparalleled longevity with its enduring adhesion, formidable peel and shear strength, rapid curing, and formidable curing strength. The substrate's condition is paramount: it must be solid, smooth, dry, crack-free, and dust-free. For substrates that are uneven, rough, dusty, or non-absorbent, pre-treating with LG180 Substrate Hardener or LG670 Non-Absorbent Interface Agent is recommended to avert substrate debonding.
Installation Instructions
For a flawless wood flooring installation, it is advisable to employ a B11 notched trowel specially designed for wood flooring adhesive. It is prudent to replace the notched bar every 100 square meters to maintain optimal performance. The open time should be carefully determined based on adhesive volume, climate conditions, and substrate absorption rate. You'll know the adhesive is primed for action when it begins to form strings.
For seamless wet bonding of SPC, WPC, and LVT flooring, using a B1 notched trowel is recommended, with a replacement of the notched bar every 100 square meters to ensure precision. Installation should commence as soon as the adhesive starts to form strings, guaranteeing effective adherence to the floor while ensuring it transfers seamlessly to the back of the flooring. During installation, employ a roller across the entire surface, using a cork board to meticulously press the edges and corners, ensuring a flush fit without any voids. This will allow the flooring to achieve a full, robust bond with the adhesive. Re-roll the surface after 20 minutes for optimal results. Adhere strictly to the technical instructions provided by Lan Guan for the best outcome.












