Product introduction
Discover the unparalleled capabilities of our Super Wear-resistant Floor Sealing Hardener. This advanced solution penetrates deeply into concrete, reaching depths of 5mm to 8mm. It engages in a transformative reaction with the free calcium and magnesium ions in the concrete, creating a robust crystalline structure. This meticulous process results in a concrete floor that is not only exceptionally hard and durable but also visually striking.
Introducing our specialized lithium-based hardener, expertly crafted for emery floors, commonly recognized as wear-resistant floors.
Over time, emery floors may accumulate dust and dirt due to their naturally porous nature as cement products. The specific structural composition, pH level, and trace element content of emery floors set them apart from other flooring types. Our tailored emery floor hardener addresses these unique characteristics. It ensures that all active components within the emery floor uniformly react, providing a consistently treated surface that stands the test of time.
Application scope
Ideal for a wide range of applications, including: Industrial floors, Workshop floors, Supermarket floors, Concrete parking lots, Concrete highways, Airport runways, Concrete bridges, Concrete docks, Concrete walls, Sports centers, Any location with a concrete or cement mortar base, Reinforcement of both new and old concrete bases, Reinforcement of new and old terrazzo bases, and Reinforcement of new and old hardened wear-resistant floors.
Technical Parameters
Hardness: After treatment, the surface hardness of the ground is reached within 1-3 days, and the highest hardness is reached
within 90-120 days |
| Impact Strength: Increased by 13%, with a hardness of Mohs scale 6. |
| Gloss: Reaches a marble-like gloss under normal walking conditions after 90-180 days. |
| Oil Penetration: Penetration rate of 0.03cc per hour (no visible penetration or marks within 30 minutes when 1mm engine oil drop is applied on the test surface; oil stains can be cleaned within 8 hours). |
| Wear Resistance: Enhances more than 40% compared to ordinary concrete floors. |
| Dust Resistance: No dust generated under Mohs scale 6 testing. |
| Flexural Strength: 28d ≥ 8MPa,Compressive Strength: 28d ≥ 50MPa. |
Advantages of Concrete Sealing Hardener Floors
- High Strength: Achieves an impressive Mohs hardness of 8, enhancing the surface strength by approximately 200%.
- Wear Resistance: Solidifies various components within the concrete into a hard, dense mass, boosting wear resistance by about six times.
- Dust Prevention: Engages in chemical reactions with the silicates in the concrete to form a dense, dust-preventive structure.
- Compression Resistance: Treated concrete shows a 40% increase in compressive strength compared to untreated samples, with a significant improvement in flexural strength.
- Water Resistance: Penetrates effectively, locking pores to prevent the ingress of water, oil, and other contaminants.
- Aging Resistance: Protects against chloride ions and UV exposure, ensuring the concrete remains unaffected by electromagnetic fields or mist.
- Corrosion Resistance: Significantly enhances the corrosion resistance of the treated concrete surface.
- Bonding Strength: Increases bonding strength with epoxy resin by 21.9%, while maintaining consistent bonding strength with coatings.
- Glossiness: Endows the treated concrete floor with a marble-like sheen, which improves progressively with extended use.
){kind=link}