Product introduction
Our Super Wear-resistant Floor Sealing Hardener is a groundbreaking product designed to penetrate deep into concrete surfaces-up to 5mm to 8mm. Through its interaction with free calcium and magnesium ions within the concrete, it creates an ultra-dense crystalline structure. This transformative process not only hardens the entire surface but also renders the concrete floor exceptionally durable, visually appealing, and highly resilient.
Specifically crafted for emery floors, our lithium-based hardener is optimized for what are commonly known as wear-resistant floors.
Over time, emery floors are prone to accumulating dust and dirt due to their porous nature as cement-based products. However, emery floors possess unique structural compositions, pH levels, and trace element contents that distinguish them from other types of flooring. Our specially formulated emery floor hardener addresses these particular characteristics, ensuring that all active ingredients within the emery floor engage in a uniform reaction, resulting in a consistently reacted and fortified surface.
Application scope
Ideal for various surfaces including: Industrial floors, Workshop floors, Supermarket floors, Concrete parking areas, Concrete highways, Airport runways, Concrete bridges, Concrete docks, Concrete walls, Sports centers. Suitable for any location with concrete or cement mortar bases, as well as for reinforcing new and old concrete bases, terrazzo bases, and hardened wear-resistant floors.
Technical Parameters
Hardness: After treatment, the surface hardness of the ground is reached within 1-3 days, and the highest hardness is reached
within 90-120 days |
| Impact Strength: Increased by 13%, with a hardness of Mohs scale 6. |
| Gloss: Reaches a marble-like gloss under normal walking conditions after 90-180 days. |
| Oil Penetration: Penetration rate of 0.03cc per hour (no visible penetration or marks within 30 minutes when 1mm engine oil drop is applied on the test surface; oil stains can be cleaned within 8 hours). |
| Wear Resistance: Enhances more than 40% compared to ordinary concrete floors. |
| Dust Resistance: No dust generated under Mohs scale 6 testing. |
| Flexural Strength: 28d ≥ 8MPa,Compressive Strength: 28d ≥ 50MPa. |
Advantages of Concrete Sealing Hardener Floors
- High Strength: Achieves a Mohs hardness of 8 on the treated concrete surface, doubling its strength by approximately 200%.
- Wear Resistance: Solidifies various concrete components into a hard, dense mass, enhancing wear resistance by up to six times.
- Dust Prevention: The chemical reaction with concrete silicates forms a dense structure that effectively prevents dust accumulation on the surface.
- Compression Resistance: Treated samples exhibit a 40% increase in compressive strength compared to untreated samples, with more than double the flexural strength.
- Water Resistance: Penetrates concrete effectively, sealing pores and inhibiting the ingress of water, oil, and other contaminants.
- Aging Resistance: Provides robust protection against damage from chloride ions and UV exposure, ensuring the concrete remains unaffected by electromagnetic fields or mist.
- Corrosion Resistance: Significantly enhances the corrosion resistance of the treated concrete surface.
- Bonding Strength: Increases bonding strength with epoxy resin by 21.9%, while maintaining consistent bonding strength with surface coatings.
- Glossiness: Treated concrete surfaces exhibit a luxurious, marble-like sheen that improves with continued use.
){kind=link}